Page 132 - S&M | Sandhack

CYLINDER HEAD REBUILDING Dial indicators sold separately Leak-Down Tester

• Apply air pressure in
Deck Bridge Tools
spark plug hole
• Compare supply psi to cylinder psi
• Verify deck height without removing block
from roll over fixture
Order No.
Description
• Flat anvil surface makes full contact • Includes 14mm & 18mm adaptors
Leak Down Tester
LDT-50
• Use Deck Bridge with either 1 or 2 dial
Replacement Hose
LDT-HOSE
indicators
10mm Adaptor
CLEANING, ASSEMBLY & SAFETY MDI-12A Description 1 Order No. intake valves. Leakage at the tail pipe shows bad exhaust valves. Worn rings or
LDT-10MM
12mm Adaptor
LDT-12MM
Deck Bridge (4 ⁄2" span)
MDBS-2
Listen to where air is leaking. Leakage at the carburetor indicates bad
Dial Indicator (12" OAL)
MDI-12
Dial Indicator Flat Anvil
MDI-12A
cylinders are indicated by leakage at the dipstick while leakage at the radiator cap
EDI-1
Economy Dial Indicator
points to block problems.
SHORT BLOCK REBUILDING Valve Seat Height Gauge
• Confirm seat height to fire deck location
• Adjusts for all popular seat diameters
• Accurate to .001"
• Seat contact probe aligns on valve Precision Straight Edges & Warp Gauge
seat while gauge rides along the fire deck
Includes Dial
CRANKSHAFT/ FLYWHEEL GRINDING Description • Adjustable to fit popular seat diameters 24" straightedge, 1 precision edge DIS-24
Order No.
Description
• Pilot aligns in valve guide
Indicator
from .750" to 3.00"
36" straightedge, 1 precision edge
DIS-36
DIS-20
24" straightedge, 2 precision edges
Fits Pilot
Order No.
DIS-30
Valve Seat Height Gauge Kit
35" straightedge, 2 precision edges
.375"
VSHG-375
3
26" Round Warp Gauge ⁄4" dia. tool steel, 26" long
Replacement Dial Indicator
EWG-100
EDI-1

MISCELLANEOUS TOOLS & SUPPLIES MBR-1 Adjustment Complete Kit Order No. ▼
Fine
Attachment
FE-KIT
Thick .0015"
FE-0015
x
FE-002
x
.0020"
FE-003
.0030"
x

FE-005
.0050"
Universal 12" Feeler Gauges .0040" FE-004 x x x x
• Use to measure piston-
FE-006
.0060"
to-wall clearance when
BRAKE SERVICE TOOLING • Fit any type of dial indicator • Also useful for shimming .0080" FE-008 x x x x
Magnetic Base Holders
.0070"
FE-007
honing, to find ring end
gap and to check cylinder
.0090"
FE-009
• Magnetic base features an
heads with a straight-edge
FE-010
.0100"
on-off switch with magnetic pull
.0150"
FE-015
of 90 pounds
• ⁄8" diameter 7" high vertical
3
and for machine set-ups
column MBR-1F while straightening heads .0200" FE-020 x
• 2" x 2 ⁄2" x 2 ⁄4" base 6 Pc. Telescoping Gauge Set
1
1
• Available with or without Fine
MEASURING TOOLS Description Order No. • Compress spring plunger and
Adjustment Feature
lock by twisting handle
Universal Holder
MBR-1
• Insert into bore and release
MBR-1F
With Fine Adjustment
plunger – it will expand to fit
• Lock again and remove
• Measure with a micrometer
Magnetic Mounting Base
• Double plunger design for
V-TWIN & METRIC HARD PARTS With 13" Flexible Arm • Long-lasting finish
consistent measuring
• Adjusts easily and locks tightly in any position
• Size range: ⁄16" - 6"
5
• 150 pounds of magnetic force
• Order No. MTG-6
• Locks in place with a single lever
• Order No. MFB-1
122 order at 1-800-533-8010 (outside the US & Canada, 1-507-452-1830) or online at www.goodson.com