Page 88 - S&M | Sandhack

" Turn to the Goodson website to find information and place orders from anywhere at any time. And
be sure to follow us on Facebook and Twitter."
– Crystal, Goodson Advertising, 3 years of service

CYLINDER HEAD REBUILDING Keyway Honing Tooling CK-3070NY3X C30-A55

Stone Sets
• Two-stroke engines have
intake and exhaust ports
that interrupt the operation of your for Honing
Dart Blocks
honing stone & Ductile Sleeves CK-3570
• These stones allow the hone to pass the intake and
exhaust ports while maintaining consistent pressure to
CLEANING, ASSEMBLY & SAFETY • Use with any AN- or GH-series hone (p. 76) Order No. • Recommended for Dart™ Machinery Order No.
remove material accurately and easily
• Use with Sulfurated Rod Honing Oil (RHO-10 or
RHO-50, p. 73) for all stone applications below
• For Cast Iron
Description
mm
Finish
Range
Grit
Honing Stone Sets For Portable Tooling
150 Grit
3.3" - 4.2"
MY33-J45
Medium
83.8 - 106.7 45 Ra
N37-A55
220 Grit
GY25-J65
280 Grit 2.5" - 3.3" 63.5 - 83.8 45 Ra GY25-J45 80 Grit N37-A25
63.5 - 83.8
2.5" - 3.3"
20 Ra
280 Grit
AN-501
83.8 - 106.7 20 Ra
MY33-J65
Fine Finish 3.3" - 4.2"
SHORT BLOCK REBUILDING 400 Grit 2.5" - 3.3" 63.5 - 83.8 8 Ra GY25-J85 For CK/CV Type Machines C30-A25
MM33-J85
400 Grit
83.8 - 106.7
MY33-J85
8 Ra
Extra Fine 3.3" - 4.2"
80 Grit Stone Set (6)
150 Grit Stone Set (6)
C30-A45
220 Grit Stone Set (6)
C30-A55
GEHN type stones
EHU
280 Grit Stone Set (6)
type stones
C30-J85
400 Grit Stone Set (6) C30-J65
CK-3570
Hardened Steel Guide Shoe (1)
C-3070K
Delron ® Guide Shoe (1)
CK-3070NY3X
CRANKSHAFT/ FLYWHEEL GRINDING Goodson Brand Shoes For CK/CV Type Machines GCK-3570
Hardened Steel Guide Shoe (1)
GCK-3070NY3X
Delron ® Guide Shoe (1)

For CK & CV Machines, DO NOT use Bronze Guide Shoes, use
Hardened Steel and Delron shoes above (1 of each)
MISCELLANEOUS TOOLS & SUPPLIES Stones & Shoes Achieving a plateaued cylinder is a multi-step process. One that is far too detailed
C-3120K
for the small space available here. Read more about this process on the Goodson
for Sunnen Hone Machines
Blog. Look for Plateau Honing 101.
• Premium-quality replacements for all CV-616, and CK-10
hones equipped with Sunnen Master Holder Sets
®
• Diameter Range: 4.125" - 5.000"/ 104.8 - 127.0mm
• Use with Master Holder Set CK-3045A (sold separately) C30-PHT-731
• 2 stones per set
BRAKE SERVICE TOOLING Stones Grit Finish Goodson - 1 set Sunnen - 6 sets MM-PHT-731
Order No.
Order No.
Use
GEHN-116
Hard Blocks 70 60 Ra
EHN-116
Air Cooled Cyl. 70 60 Ra
GEHN-123
EHN-123
Hard Blocks 220 22-32 Ra
EHN-518
Air Cooled Cyl. 220 22-32 Ra GEHN-512 EHN-512
GEHN-518
Hard Blocks 70 60 Ra GEHU-123 EHU-123 Ultra-Finish
Roughing 70 60 Ra GEHU-133 EHU-133 Plateau Hones
Hard Blocks 220 22-32 Ra
GEHU-518
EHU-518
MEASURING TOOLS Gen. Purp. 220 22-32 Ra GEHU-525 EHU-525 • For Portable Hones,
Hone Cabinets and CV/CK Tooling
GJHU-525
Aluminum
220 30-36 Ra
JHU-525
• Abrasive impregnated nylon bristles
JHU-623
GJHU-623
High Nickel 280 20-25 Ra
280 16-23 Ra
Finishing
rebuilding newer style engines that use low-tension rings
JHU-818
High Nickel 400 7-14 Ra GJHU-625 JHU-625 • Ideal for high-performance rebuilding and
GJHU-818
Aluminum 400 7-14 Ra GJHU-820 JHU-820 • Superior plateau finish so rings will seal immediately
Accessories Qty. Order No. • Reduces break-in time
V-TWIN & METRIC HARD PARTS Sunnen Centering Guide (includes CK-3070) 1 CK-3090A For Portable Hones and Hone Cabinets – Includes 1 pair MM-PHT-731
• Allows closer tolerances for improved compression, better
CK-3045A
1
Sunnen Master Holder Set
®
oil control, lower emissions • Fits AN- or GH-series hones
®
1
Sunnen Guide Shoe & Screw Set
CK-3070
®
96.0 - 118.9
1
CK-3120
AN/ GH-Style 3.78" - 4.68"
Sunnen Guide Shoe & Screw Set
®
2
C-3070K
For Sunnen CV / CK Hone Heads – Includes 1 pair
Goodson Wear Shoe
Goodson Stabilizing Shoe
For Rod Honing Stones and Shoes see page 83 2 C-3120K Standard 3.10" - 5.00" 78.7 - 127.0 C30-PHT-731

78 order at 1-800-533-8010 (outside the US & Canada, 1-507-452-1830) or online at www.goodson.com